Microbiologist.in
Pharma QC microbiology, in your pocket
Department
Every USP microbiology chapter, from <51> to <1229.6>, with the SOPs, protocols, courses and virtual labs that put it into practice.
34 chapters. Each one has a package that unlocks all its mapped content. See Pharma Quality Assurance
The preservative challenge test: the product is inoculated with five test organisms and sampled over 28 days, and the log reductions are compared with the criteria for its product category.
2 docs1 course1 lab₹1,599
A test for the absence of BCC in non-sterile products: enrichment in soybean-casein digest broth and subculture on Burkholderia cepacia selective agar, with confirmation of suspect colonies.
2 docs2 courses₹1,499
Counts the total aerobic microbial count (TAMC) and total yeasts and moulds count (TYMC) by membrane filtration, plate count or MPN, after method suitability with the product.
10 docs4 courses2 labs₹2,999
Tests for the absence of E. coli, Salmonella, P. aeruginosa, S. aureus, bile-tolerant Gram-negative bacteria, Clostridia and C. albicans in a defined quantity of product.
7 docs2 courses1 lab₹2,999
Measures the water available to micro-organisms in a product; low water activity supports reduced microbial testing under a risk assessment.
2 docs₹299
Recommended TAMC, TYMC and specified-organism criteria by route of administration, and how to interpret counts against them.
5 docs2 courses1 lab₹1,599
A risk-based programme to control bioburden in non-sterile manufacture: raw materials, water, equipment, hold times, environment and objectionable organisms.
4 docs1 course₹399
Mycoplasma testing of cell banks, harvests and biological products by culture, indicator cell culture and validated nucleic acid amplification methods.
1 docs1 course₹1,099
The pharmacopoeial sterility test by membrane filtration or direct inoculation, with 14 days of incubation, method suitability and rules for invalidating a test.
4 docs3 courses1 lab₹2,699
Detects and quantifies endotoxins with amoebocyte lysate by gel-clot, turbidimetric or chromogenic methods, with the endotoxin limit, MVD and interference tests.
3 docs3 courses3 labs₹1,299
Endotoxin testing with recombinant factor C or a recombinant cascade reagent, an animal-free alternative to LAL that needs validation or comparability.
1 docs1 course1 lab₹1,099
The rabbit pyrogen test: temperature rise after intravenous injection, with a three-rabbit and an eight-rabbit stage; largely replaced by endotoxin and monocyte activation tests.
1 docs2 courses₹2,399
How sterility is assured beyond the sterility test: sterilisation, aseptic processing, process simulation, environmental control and the contamination control strategy.
3 docs2 courses1 lab₹2,799
How the population, D-value and survival/kill times of biological indicators are verified before they are used to challenge sterilisation cycles.
3 docs1 course1 lab₹399
The family of chapters on sterilisation: moist and dry heat, radiation, gas, filtration and liquid sterilants, with cycle development, validation and routine control.
10 docs2 courses1 lab₹2,499
Saturated steam sterilisation of porous and hard goods: air removal, Bowie-Dick testing, heat distribution and penetration, and biological indicator challenge.
9 docs1 course1 lab₹1,299
Sterilisation of liquids in sealed or vented containers: slowest-heating container, F0, overkill and bioburden-based cycles, and controlled cooling.
3 docs1 course1 lab₹499
Bioburden counts of components, bulk solutions and products before sterilisation, as input to cycle design and routine control.
2 docs1 course1 lab₹1,399
Sterilising-grade filters: bacterial retention with Brevundimonas diminuta, compatibility, and pre-use and post-use integrity testing.
2 docs1 course1 lab₹1,499
Choice and use of biological indicators for each sterilisation method, their resistance and their placement in cycle validation.
3 docs1 course1 lab₹399
Sterilisation of heat-sensitive items by immersion in liquid chemical sterilants, with sporicidal validation, contact time and rinsing.
1 docs1 course₹299
Classes of disinfectants, selection and rotation with a sporicide, and how to show efficacy on the site's surfaces against its own isolates.
14 docs2 courses1 lab₹2,299
Environmental monitoring of aseptic areas based on contamination recovery rates: methods, locations, frequency, excursions and trending.
20 docs4 courses3 labs₹2,999
Selection, calibration, placement and data review of the devices that monitor storage areas, chambers, incubators and shipments.
4 docs₹599
A life cycle for qualifying instruments by group (A, B, C): user requirements, installation, operational and performance qualification, and keeping them qualified.
5 docs1 course₹2,199
How isolates are characterised and identified, from Gram stain and biochemical systems to MALDI-TOF and sequencing, and when strain typing is needed.
7 docs2 courses2 labs₹1,499
Good practice for the micro lab: media preparation and growth promotion, culture maintenance, equipment, training, documentation and data review.
18 docs4 courses2 labs₹1,499
The performance characteristics to validate for each category of analytical procedure: specificity, linearity, range, accuracy, precision, detection and quantitation limits, robustness.
2 docs2 courses₹2,499
Showing that a compendial procedure works for the product in the user's laboratory, without full validation.
3 docs1 course₹1,699
Neutralisation and recovery studies that prove a test recovers micro-organisms in the presence of the product.
5 docs2 courses1 lab₹2,099
Potency of antibiotics by the cylinder-plate (agar diffusion) or turbidimetric method, comparing the response of the sample with that of a reference standard.
3 docs₹299
Cytotoxicity of elastomers, plastics and polymers on mammalian cells by agar diffusion, direct contact or elution, graded 0 to 4.
1 docs₹299
Systemic injection, intracutaneous and implantation tests that classify plastics into Classes I to VI.
1 docs₹299
Environmental Monitoring SOP Pack
38 editable SOPs: EM programme, EM performance qualification, disinfectant validation, settle plates, active and online air sampling, swabs, particles, compressed gases, personnel monitoring, cleaning, disinfectants, excursions and trending.
38 SOPs₹1,499
Water System Monitoring SOP Pack
11 editable SOPs: water sampling and testing, microbial data deviations and trend evaluation.
11 SOPs₹699
MLT, Media and Cultures SOP Pack
29 editable SOPs: MLT, coliform test, GPT, media, cultures, isolates, Gram staining, preservative efficacy, bioburden and automated identification.
29 SOPs₹1,499
Micro Lab Instruments SOP Pack
69 editable SOPs for autoclaves, incubators, chambers, BSC, UAF, air samplers, sterility pumps, ovens, balance, pH meter, micropipettes and more.
69 SOPs₹1,999
Micro Lab Practices SOP Pack
29 editable SOPs: entry and exit, good lab practices, samples, glassware, garments, material movement, waste, spillage, OOS, protocols, analyst qualification and BIs.
29 SOPs₹999
Sterile Products Testing SOP Pack
34 editable SOPs: sterility test, media fill (APS), BET gel clot, bioburden, CCIT, personnel and particle monitoring, compressed gases, sterility pumps, depyrogenation, garments and OOS.
34 SOPs₹1,999
Regulatory Compliance & Validation SOP Pack
21 editable SOPs: contamination control strategy, media fill, disinfectant and method validation, data integrity, EM qualification, objectionable organisms, inspection readiness, OOS and trending.
21 SOPs₹2,499
Complete Micro QC SOP Library
All 183 SOPs across the seven packs, plus the 500-question interview eBook.
BUNDLE₹6,999
Chapter summaries are written in our own words for learning. Always refer to the current official USP–NF text.